Radionics 9000

Arm
Code + [ENT]
Shortcuts:
[COMMAND][1] Arms All.
[COMMAND][2] Arms Perimeter, entry zone is instant.
[COMMAND][3] Arms Perimeter, entry zone delays.

Disarm
Code + [ENT]

Set System Time
[COMMAND][4][5] + Time + [ENT] + ([ENT] for AM or [NEXT][ENT] for PM) + Date + [ENT]

Check Faulted Zones
Press any numeric key [0-9] and keypad will scroll through faulted zones.

Smoke Reset
After silencing alarm with Code + [ENT], press [COMMAND][4][7] to reset smoke detectors.

Code Change
[COMMAND][5][5]; Enter Old Code + [ENT]; Enter New Code + [ENT]; Enter New Code Again + [ENT].
To ADD a code, [COMMAND][5][6].
To DELETE a code, [COMMAND][5][3].

Chime Mode On/Off
[COMMAND][6]

Force Arm Over Bad Zones
Code
Keypad displays [CHK AREA X]
Press [NEXT] through the list of all faulted points OR just press [COMMAND].
[FORCE ARM?] will display at the end of the list; Press [ENT].

Power Down Panel
Pull one wire on battery in panel then unplug the panel transformer if you know where it is.
It is a beige box plugged into a nearby power outlet. Click here for a picture.
If you can’t find it, then disconnect AC power by removing wire on terminal 1, upper left corner of panel.

User Manual