Radionics 4112

Arm
Code + [ENT]
OR
[COMMAND] [1] Arm All
[COMMAND] [2] Perimeter Instant
[COMMAND] [3] Perimeter Delay

Disarm
Code + [ENT]

Check Faulted Zones
Zone lights light when faulted.
Slow blink means the zone is bypassed.
Fast blink is alarm memory.

Smoke Reset
[COMMAND] [4] [7] (Disarm to silence siren first.)

Code Change
[COMMAND] [5] + Old Code + [ENT] + New Code + [ENT] + New Code + [ENT]

Chime Mode On/Off
[COMMAND] [6] (Radionics calls it the “Watch Mode”)

Force Arm Over Bad Zones
Code + [ENT] + [COMMAND] + [ENT]

Power Down Panel
Pull one wire on battery in panel then unplug the panel transformer if you know where it is.
It is a beige box plugged into a nearby power outlet. Click here for a picture.
If you can’t find it, then disconnect AC power by removing wire on terminal 1
Lower left corner of panel on D4112, Upper left corner of panel on D6112.

User Manual
D4112 (6 Zone Keypad.)
D6112 (8 Zone Keypad.)