Napco LCD

Arm
Enter your [CODE], then press the [ON/OFF] button.

Disarm
Enter your [CODE], then press the [ON/OFF] button.

Check Faulted Zones
You have faulted zones if the green status light is not on.
Faulted zones will display on the screen one at a time.

Smoke Reset
Enter your [CODE], then press [ON/OFF] to silence the alarm.
Press [RESET] to silence the keypad.
Then press [RESET] again to reset smoke detectors.

Bypass Zone(s)
Press [BYPASS], then type the zone number to bypass.

Power Down Panel
Pull one wire on battery in panel then unplug the panel transformer if you know where it is.
It is a beige box plugged into a nearby power outlet. Click here for a picture.
If you can’t find it, then disconnect AC power by removing wire on terminal 1, upper left corner.