Napco Alpha

Arm
Enter your [CODE], then press the [ON/OFF] button.
Disarm
Enter your [CODE], then press the [ON/OFF] button.
Check Faulted Zones
You have faulted zones if the green status light is not on.
[ZONES FAULTED] will display on the screen followed by the number and description of each faulted zone.
Smoke Reset
Enter your [CODE], then press [ON/OFF] to silence the alarm.
Press [RESET] to silence the keypad.
Then press [RESET] again to reset smoke detectors.
Code Change
Enter your [CODE], then press [FUNCTION] to enter the Function mode.
Answer “No” (press [INSTANT]) until [ACTIVATE PROGRAM Y/N] displays, then press “Yes” ([INTERIOR] or [ON/OFF] button).
If you scrolled too far, you can press [BYPASS] to scroll in reverse.
You will be presented with a screen that looks something like [U01 123 – – ]. This example is displaying User 1 (always a 2-digit number) and then user 1’s code “123”.
Use the [FUNCTION] button to locate the cursor over the user # if it isn’t already. The [FUNCTION] toggles the cursor from User # to User code.
Enter the 2-digit user # that you want to enter/change.
The cursor will automatically jump to the user code. Enter new code using the number pad. You can press [*][0] to erase the number at the cursor.
Press [ON/OFF] to save the code in memory.
Press [RESET] to exit.
Chime Mode On/Off
Enter your [CODE], then press [FUNCTION] to enter the Function mode.
Answer “No” (press [INSTANT]) until [ACTIVATE CHIME Y/N] displays, then press “Yes” ([INTERIOR] or [ON/OFF] button) to activate, “No” [INSTANT] to deactivate.
Press [RESET] to exit.
Bypass Zone(s)
Press [BYPASS], then type the zone number to bypass.
Power Down Panel
Pull one wire on battery in panel then unplug the panel transformer if you know where it is.
It is a beige box plugged into a nearby power outlet. Click here for a picture.
If you can’t find it, then disconnect AC power by removing wire on terminal 1, upper left corner.