Concord

Arm
[2] Stay + Code
OR
[3] Away + Code
Disarm
[1] Off + Code
Check Faulted Zones
Press [*] Status
Smoke Reset
[1] + Code to silence alarm, then [1] + Code again to reset the smoke detector
Code Change
To change the MASTER CODE
Enter the programming menus by pressing [9] + the current System Master Code.
Press [1][1][0]. Enter the desired 4-digit System Master Code, then press [#].
Press [*][4][#] to exit the programming menus.
To change a USER CODE,
Enter the programming menus by pressing [9] + System Master Code.
Press [1][0] nn [0] where nn is user 00 through 15.
Enter the desired 4-digit code, then [#].
To delete the code, enter the system master code, then [#].
Press [*][4][#] to exit the programming menus.
Chime Mode On/Off
[7] + [1]
Bypass Zones
Indirectly: [2] Away + Code + [#] or [3] Stay + Code + [#].
Directly: [#] + Code + Zone Number.
Power Down Panel
Pull one wire on battery in panel then unplug the panel transformer if you know where it is.
It is a beige box plugged into a nearby power outlet. Click here for a picture.
If you can’t find it, then disconnect AC power by removing wire on terminal 1, far left terminal.